MiLAN MIL-RCM16A Specifiche Scaricare il pdf (Pagina 33)

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713

Avoid making sharp bends in wiring.

CAUTION

REMOVING SWITCH FROM RH RUNNER

FIG. 33-1

SWITCH &

BRACKET

18. If RH runner is being

replaced, unbolt switch

mounting bracket as shown

in FIG. 33-1. Pull switch,

bracket, and cable from the

runner.

BOLTS

LOCK

WASHERS

OPENING FOR

SWITCH

19. If RH runner is being replaced, reinstall

switch, bracket, and cable in runner as

follows. Make a wire ﬁ sh by feeding 8 feet

of small gauge wire through switch opening

in runner (FIG. 33-1). Pull wire through

channel at lower end of runner. Leave

enough wire at the switch opening to attach

to switch cable, and enough wire to pull at

the lower end of runner. Tie upper end of wire

ﬁ sh to switch cable connector. Pull connector

and cable through runner until connector

exits lower end of runner. Then, bolt switch

mounting bracket to runner (FIG. 33-1).

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 85 86

Nessun commento

MiLAN MIL-RCM16A Specifiche Pagina 33