MiLAN MIL-RCM16A Specifiche Scaricare il pdf (Pagina 20)

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713

PLATFORM CHAIN ADJUSTMENT - Continued

4. To adjust with the u-bolt, do the following. If

necessary, raise platform enough to gain ac-

cess to the adjusting nuts on both u-bolts. Next,

loosen the jam nuts on both u-bolts (FIG. 20-

1B). Alternately and equally tighten the lock nuts

on each u-bolt (FIGS. 20-1B and 20-1C).

Then, measure distance “H2” at the tip of the

platform (FIG. 20-1A). When distance “H2” is

equal to distance “H1” (+0” / -1”), or u-bolt is at

maximum adjustment (FIG. 20-1C), securely

tighten jam nuts on both u-bolts.

FIG. 20-1A

”H1”

GROUND

”H2”

Personal injury and damaged equipment could result if chains separate from

platform under load. Ensure each leg of u-bolts extends minimum of 1/8” from

lock nut. When adjustment is complete, ensure jam nuts are tightened securely.

1/8”

(MIN)

U-BOLT AT MINIMUM LIMIT

(RH SIDE SHOWN)

FIG. 20-1B

JAM NUT

(2 PLACES)

LOCK NUT

(2 PLACES)

PLATFORM

U-BOLT

U-BOLT ADJUSTED TO MAXIMUM

LIMIT (RH SIDE SHOWN)

FIG. 20-1C

PLATFORM

JAM NUT

(2 PLACES)

LOCK NUT

(2 PLACES)

WARNING

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 85 86

Nessun commento

MiLAN MIL-RCM16A Specifiche Pagina 20